• Integrated long-life photocell
  • Efficient thermal management
  • Streamlined and super lightweight
  • LED efficacy 145 lm/W
  • Constant Light Output
  • Soft start function
  • ENEC Approved


The AIR1+ is the latest iteration of INDO’s hugely successful AIR1 LED streetlight. This model features all the benefits of Direct Drive® with the added functionality of pre-programmed dimming profiles. The unique casting is constructed from marine grade aluminium providing effective thermal management and a robust luminaire structure.

Despite its robustness however, the unit is extremely light at 3.1kg and the sleek design results in minimal column loading, (especially important where existing columns have limited life or additional load constraints). Combined with the multiple mounting options available as standard, this makes the AIR extremely easy for a single operator to install.

View Brochure

View Datasheet

Download Photometry

Lookup UMSUG Code

Additional information


10W, 15W, 20W, 25W, 30W, 35W, 40W

CMS Compatible


Colour Rendering Index (CRI)

> 70

Constant Light Output


Correlated Colour Temperature (CCT)

3,000K, 4,000K, 5,000K


20mm Pre-drilled, Integrated Photoswitch, NEMA (3 pin)


427mm (L) x 200mm (W) x 110mm (D)


Dimmed to 50% [00:00 – 05:00], Dimmed to 75% [00:00 – 05:00], Dimmed to program, No dimming

Direct Drive&reg


IP Rating


LED Efficacy

145 lm/W

Lens Type

1C, Area 1, Area 2, Area 3, SW, SWA, SWB

Lumen Maintenance (L80B50)

140,000 hours


Post top (60-76 mm) and Side entry (34-60 mm)

Operating Temperature Range

-20 degrees C (min) to +40 degrees C (max)

Optical Risk Group


Power Factor


Reliability (Failures per million hrs)


S/P Ratio (@4000K)


Switch Regime (integrated photocell)

20/20 lux, 35/18 lux, 55/28 lux, Not fitted

Voltage (V)

195 – 265V




0.025 m2

Surge Protection

2kV DM, 4kV CM

To specify:

A cutting edge functional LED exterior luminaire addressing a range of low output residential lighting applications. Suitable for mounting between 34mm-42mm and 48mm-60mm side entry and 60mm-76mm post top as standard without brackets or adaptors. Optional tilt to be applied without the use of external brackets or spigots; with a mechanism integrated within the body of the luminaire. To be lightweight and low profile, manufactured from LM6 Marine Grade aluminium. Luminaire is to be reliable; with every effort made to reduce component count, and should not contain wet electrolytic capacitors. Luminaire should not require ongoing scheduled maintenance visits – the entire luminaire being suitable for operation to the chosen LxxByy period without any component changes. Luminaire is to have a fully dimmable option, and this option is to be able to interface via NEMA socketry; functioning fully with a range of Central Management Systems. Luminaire should have an included temperature sensor to provide dimming as necessary to protect against high ambient operating temperatures. A temperature dependent soft start feature should be deployed to protect against LED failures at low temperatures. An option should exist for a light sensor, separate from any PECU or NEMA cell, to protect against day burning in the event that a PECU or NEMA cell fails. Front, back and side shields should be available and suitable for mounting directly to the luminaire without additional drilling or tapping required on-site.

As per INDO AIR1

You may also like…