• INDO’s most advanced LED T8 replacement
  • Integrated motion sensor
  • Dims to 20% when no activity
  • Long range and reliable sensing
  • Efficient thermal management
  • High output LEDs
Add to Quote


The T8XE is INDO’s most advanced LED replacement for T8 fluorescent lamps.

Boasting the same high grade circuitry features as our high efficiency T8HE, this unit has the added advantage of an integrated motion sensor for smart control. The lamp operates in two modes – dimmed to 20% and full output. When motion is detected in the area the lamp will maintain full brightness and, following 1 minute of inactivity, will automatically dim down to 20% brightness.

Significant savings are realised both from the upgrade to efficient LED technology and also due to the reduced power consumption while the area is unoccupied.

INDO Lighting’s T8 LED tubes offer superior quality and performance. Smart engineering principles are used throughout the design and manufacturing process, for example by using more LEDs on the PCB. This means we can use a lower drive current to ensure less heat produced per LED. And this, when combined with our powerful heat sink, ensures a lower running temperature reduced lumen depreciation and therefore significantly longer life. In addition, the light output from the INDO T8 range is smoother, looking more like a continuous linear source

Rotatable end caps allow orientation of the lamp to be locked in any position, giving you more control over where you want the light to be directed

A typical payback period using the INDO T8XE is as low as 2 years. These financial benefits, coupled with the ease of installation, make this an attractive option for any scheme currently utilising T8 or T12 lamps.

Read Case Study >

View Datasheet >

Download Photometry

Additional information


11W, 17W, 20W, 24W


1200mm, 1500mm, 600mm, 900mm

Correlated Colour Temperature (CCT)

3,000K, 4,000K, 5,000K, 6,500K





Lens Type

Clear Lens, Frosted Lens

Luminaire Colour

Not applicable

Beam Angle

120 degrees

Direct Drive


Operating Temperature Range

-20 degrees C (min) to +40 degrees C (max)

Colour Rendering Index (CRI)

> 80

CMS Compatible


Power Factor